Phobya Radiator Stand Bench Edition & 4x. AlphaCool Cape Corp 2m.

Alright, a crappy picture but this is how a man water cools his system.
To start with, the whole shebang is external, two AlphaCool Cape Corp
50cm. are being used to hold another couple of those reservoirs, when
used with two connectors this turns into two 1 meter reservoirs.

Add three EKWB XTX 360 radiators (discontinued and replaced if im not
wrong) and you will have a cool system.

I run an overclocked Intel i7 4820K and a pair of ASUS GTX 770 DCIIOC
and under heavy load the CPU reaches a maximum of perhaps 60 degrees,
and that is because i have the voltage set to auto and the MBU is being
more than generous it feels like when it predicts what voltage is needed.
We're talking more than 1.4 volts here.
The graphic cards are running somewhere around 35-40 degrees.

The sad thing though is that one of the reservoir towers fell to my wooden
floor in the living room ending up K.I.A. and with three reservoir tubes left
i felt that it would look silly and wrong with one reservoir being 50cm long
and the other 1m so one has been recieving the status of being a spare.

Which leaves me with two 50cm reservoirs, still manly but not as manly as
two 1m. ones.

Well well.

Over & out.

Externally water cooled HTPC with alot of juice in it.

This is the final build (around 95% at least) and here are some pictures of it (i'm getting better at that damned camera haha):

The complete picture so to speak.

Those two EKWB nickel plated fittings will be replaced with Monsoon 13/10 black ones.

 I do dig the gold theme.

 I'm pretty pleased with the solution, it's extremely tight in this Silverstone Crown case.

 A.C. Ryan 80mm. LED-fans.

 Two more, blowing air out the back.

 It is pretty difficult to get a good view for a great picture of the graphics cards.

 Too bad the UV doesn't show in these pictures.

 The tubing to the external cooler comes out the back where i drilled two holes and places two Bitspower fittings.

 Out in the back the water flows.

 The external cooler.

 Three EKWB 360 XTX radiators are in that housing from Phobya.

 Not sure if it shows but there is more work to do regarding the cable management.

An overview.

The worlds first one meter external water cooling reservoir?

Firstly, the pics will be upgraded later on because i had to use my pad since the system camera was on a strike complaining that my SD Card was bad.

Well, here is what you see regarding my final open air external watercooling setup (ordered a Phobya radiator stand from Deutschland which will contain the whole shebang):

2x. EKWB XTX 360 radiators.
1x. EKWB DDC 3.2 PWM pump.
8x. Cougar Vortex 120mm. PWM fans (four on the way).
4x. Phobya Radiator Grills (Bubble edition).
Monsoon fittings & adaptors and so on.
XSPC 19/13. hose.
Primochill (most likely) anti kink coils.
1x. Phobya 8 PWM splitter.
1x. Alphacool reservoir connector (brass) black.
2x. Alphacool Cape Corp Pro 50 (50cm.) tube reservoirs.

Enjoy!